Charger Module has power of 30kw EV Charger Module

Charger Module has power of 30kw EV Charger Module

The charger module is the inner power module for DC charging stations (piles), and convert AC energy into DC in order to charge vehicles. The charger module takes a 3-phase current input and then outputs the DC voltage as 200VDC-500VDC/300VDC-750VDC/150VDC-1000VDC, with an adjustable DC output to meet a variety of battery pack requirements.

50-1000V ultra wide output range, meeting car types in the marketand adapt to high voltage EVs in future. Compatible with the existing 200V-800V platform and provides full power charging for future development above 900V which is able to avoid investment on high voltage EV charger upgrade construction.
Support CCS1, CCS2, CHAdeMO, GB/T and energy storage system.
Meet the future trend of high-voltage charging of electric vehicles, compatible with various charging applications and car types.

The charger module is equipped with a POST (power on self-test) function, AC input over/under voltage protection, output over voltage protection, over-temperature protection and other features. Users can connect multiple charger modules in a parallel manner to one power supply cabinet, and we guarantee that our connect multiple EV chargers are highly reliable, applicable, efficient, and require very little maintenance.
Applications
The charger modules can be used on DC fast charging stations for EVs and E-buses.
Note: The charger module does not apply to on-board chargers (inside cars) .

Advantages
System space is saved due to a high power density, and each module has a power of 15kW or 30kW.
Wide input voltage: 260V-530V, designed with input surge protection.
The charger module uses DSP (digital signal processing) control technology, and is fully numerically controlled from input to output;
Uses interlaced series resonance soft switch technology to reduce the tolerance of power devices.
Input THDI < 3%, input power factor reaches 0.99 and overall efficiency reaches 95% and above
Wide output voltage range: 200VDC-500VDC, 300VDC-750VDC, 150VDC-1000VDC (adjustable), is able to meet various voltage demands of different charging requirements
Low DC ripple causes minimum effects on the battery lifespan
Standard configuration of CAN/RS485 communication interface, allows easy data transferring with external devices
The charger module is equipped with input overvoltage protection, undervoltage alarming, output overcurrent and short circuit protection functions.
The charger modules can be connected in a parallel system, allowing for a hot swapping and easier maintenance. This also ensures the system applicability and reliability.