Liquid-Cooled 600A NACS Charging Connector Coupler Tesla NACS Plug

The 600A NACS DC charging couplers are a series of modularized products, which cover the range of current from 16A to more than 600A. Charging current of Natural-cooled ones is up to 350A. Liquid-cooled types are applied to charging current higher than 500A with cable diameter smaller than 36mm.

Model: MIDA-NACS-EV600P

Rated voltage: 1000V DC

Rate Current: 250A, 350A,400A,600A

Rated Drop Resistance:: 100 drops

Insertion / Withdrawal Force: : ＜ 90N

Protection Degree: IP67 Waterproof

UV Resistance:: F1 per UL 746C

Working temperature: -40°C ~+50°C

Standard: North American Charging Standard

Inquiry WhatsApp Skype Email

Product Detail

Product Tags

Product Introduction

600A NACS Charging Cable is Tesla’s previously proprietary direct current (DC) fast charging connector standard—formerly known simply as the “Tesla charging connector.” It has been used with Tesla cars since 2012 and the connector design became available to other manufacturers in 2022. It was designed for Tesla’s 400-volt battery architecture and is much smaller than other DC fast charging connectors. The 600A NACS connector is used with Tesla superchargers, which currently charge at a rate of up to 600kW.

Product Features

1.The 600A NACS connector has a single button located on the top center of the handle. When the button is depressed, a UHF signal is emitted. When the connector is locked in place, the signal commands the vehicle to retract the latch holding the connector in place. When the connector is not locked in place, the signal commands the nearby vehicle to open the door covering the inlet.

2,If charge point operators want to offer charging for new Ford and GM EVs, they’ll need to convert some of their CCS1 charger connectors to 600 NACS Plug. DC fast chargers like Tritium’s PKM150 will be able to accommodate 600A NACS connectors in the near future.

3,Tesla Gun 600A Tesla NACS Connector,600A Tesla NACS Plug for Tesla Supercharger station.

Specification

Features	1. Meet NACS standard
	2. Concise appearance, support back installation
	3. Protection Degree: IP67
	4.Max charging power: 400kW
Mechanical Properties	1. Mechanical life: no-load plug in/pull out＞10000 times
Mechanical Properties	2. Impat of external force: can afford 1m drop amd 2t vehicle run over pressure
Electrical Performance	1. DC input: 400A 1000V DC MAX
	3. Insulation resistance: ＞2000MΩ（DC1000V）
	4. Terminal temperature rise: ＜50K
	5. Insertion / Withdrawal Force: ＜ 90N
	6. UV Resistance: F1 per UL 746C
Applied Materials	1. Case Material: Thermoplastic,flame retardant grade UL94 V-0
Applied Materials	2. Pin: Copper alloy,silver +thermoplastic on the top
Environmental Performance	1. Operating temperature: -40°C~+50°C

Product Pictures

EV Charging Cable TESLA NACS Gun Features

Physical design

The 600A TESLA NACS Gun is an EV connector complies with the standard of NACS. The 600A NACS connector is used with Tesla superchargers, which currently charge at a rate of up to 600kW.

Ultrasonic Welding Technology

This technology can make the resistance of the EV tend to zero during the charging process, and reduce the phenomenon of heating up during the DC charging process of the EV.

Voltage Rating

The 80A ,125A ,200A,250A ,350A ,400A 600A TESLA connector can be used to charge electric vehicles quickly, thanks to its 1,000-volt DC maximum voltage rating. It is the ideal choice for anyone who wants to charge their electric vehicle quickly and efficiently. The 400A TESLA connector, with its high voltage rating, 400A TESLA Plug is ideal for charging electric vehicles.

Quality Assurance

MIDA TESLA EV Plugs can withstand more than 10,000 times of plugging and unplugging. Ensure the safety of long-term power supply, solid and durable, and wear-resistant. It reduces the operation and maintenance costs of electric vehicle charging enterprises.

Safe Features

The 400A TESLA connector has a number of safety features that protect against potential hazards such as overvoltage and overcurrent. These features include short circuit protection, ground fault detection, and temperature monitoring.

OEM&ODM

400A TESLA Gun supports simple LOGO customization and also supports customization of the entire function and appearance. There are professional sales and technical personnel docking. Open the road of brand agency for you.

High Power Ratings

MIDA TESLA plug Designed to handle high currents, offers exceptional power ratings of 80A, 125A, 200A, and 250A ,350A ,400A TESLA Connector. This outstanding capacity ensures ultra-fast DC charging speeds significantly reducing the time spent at charging stations.

Versatility and Compatibility

The 400A TESLA plug compatible with all TESLA EV models on the market today.whether you own a compact electric car, a powerful electric SUV a heavy truck, a bus or a commercial electric vehicle, our 400A NACS Gun TESLA plug is designed to meet your DC fast charging needs

Enhanced Safety Features

Ultrasonic welding technology is used between the conductive terminal and the cable, the contact resistance tends to be zero, the temperature rise is lower during use and the service life of the product can be extended at the same time. And built-in temperature sensors, the charging process is safer

Previous: 30kw 40kw Charging Module EV RS485 CAN Communication Protocol Rectifier Power Module

Next: UL 2251 300A 350A CCS Combo 1 Plug DC EV Charging Connector

600A NACS Connector