600A CCS Liquid Cooling Cooling Cable Connector for EV Fast Charger Station
1,600Amp Liquid-Cooled CCS2 DC Connector is a high-performance solution for EV charging stations, offering efficient power delivery and rapid charging capabilities.
2,High Power 600A CCS Combo Charger With Liquid Cooling IEC62196-3 .CCS2 HPC DC Vehicle Liquid Cooled Charging Connector.600A liquid cooling technology ensures efficient heat dissipation, allowing for continuous high-power charging without overheating. The connector is suitable for various application scenarios, including public charging stations, private garages, and EV service centers.
3,600A Liquid-Cooled CCS2 DC Connector is a cutting-edge solution for high-power electric vehicle (EV) charging infrastructure. With TUV and CE certifications, this connector is designed to handle a maximum charging current of 700A, making it ideal for fast-charging stations and commercial EV fleet operators.
MIDA's CCS1 water-cooled cable and 600A CCS2 oil-cooled cable adopt liquid circulation cooling technology, using dedicated liquid circulation channels between the cable and the charging connector to carry away the heat generated during the charging process. This not only effectively reduces the temperature of the charging cable but also supports charging power up to 800kW, significantly increasing charging speed. In contrast, traditional 600A CCS1/CCS2 charging cables rely on air circulation for cooling and can only support up to 400kW of charging power, resulting in slower charging speeds.
In terms of charging time, MIDA's 600A liquid-cooled cables have undergone continuous optimization, with voltage increasing from the initial 400V to 800V and 1000V; meanwhile, the current has been raised from the original 80A to 250A, and even up to 600A for supercharging levels. SINBON's liquid-cooled cables can maintain 600A continuous charging with dual cables, and under specific strategies, can achieve short-term charging at 800A, capable of charging a 100kWh battery pack to 80% in about 10 minutes.
Features | 1. Meet 62196-3 IEC 2011 SHEET 3-Im standard |
2. Concise appearance, support back installation | |
3. Back Protection class IP55 | |
4.Max charging power: 400kW/500kW/600kW | |
5. AC Max charging power: 45.36kW | |
Mechanical Properties | 1. Mechanical life: no-load plug in/pull out>10000 times |
2. Impat of external force: can afford 1m drop amd 2t vehicle run over pressure | |
Electrical Performance | 1. DC input: 400A/500A /600A 1000V DC MAX |
2. AC input: 16A 32A 63A 240/415V AC MAX | |
3. Insulation resistance: >2000MΩ(DC1000V) | |
4. Terminal temperature rise: <50K | |
5. Withstand Voltage: 3200V | |
6. Contact resistance: 0.5mΩ Max | |
Applied Materials | 1. Case Material: Thermoplastic,flame retardant grade UL94 V-0 |
2. Pin: Copper alloy,silver +thermoplastic on the top | |
Environmental Performance | 1. Operating temperature: -30°C~+50°C |
Physical design
The 600A CCS2 Gun is an EV connector complies with the standard of IEC62196. The connector is compatible with AC and DC charging. Separate pins are used for each mode.
Ultrasonic Welding Technology
This technology can make the resistance of the EV tend to zero during the charging process, and reduce the phenomenon of heating up during the DC charging process of the EV.
Voltage Rating
The 600A CCS2 connector can be used to charge electric vehicles quickly, thanks to its 1,000-volt DC maximum voltage rating. It is the ideal choice for anyone who wants to charge their electric vehicle quickly and efficiently. The CCS2 connector, with its high voltage rating, CCS2 Plug is ideal for charging electric vehicles.
Safe Features
The 600A CCS2 connector has a number of safety features that protect against potential hazards such as overvoltage and overcurrent. These features include short circuit protection, ground fault detection, and temperature monitoring.
Quality Assurance
MIDA CCS 2 EV Plugs can withstand more than 10,000 times of plugging and unplugging. Ensure the safety of long-term power supply, solid and durable, and wear-resistant. It reduces the operation and maintenance costs of electric vehicle charging enterprises.
OEM&ODM
600A CCS 2 Gun supports simple LOGO customization and also supports customization of the entire function and appearance. There are professional sales and technical personnel docking. Open the road of brand agency for you.
High Power Ratings
MIDA 600A CCS2 plug Designed to handle high currents, offers exceptional power ratings of 600A CCS 2 Connector. This outstanding capacity ensures ultra-fast DC charging speeds significantly reducing the time spent at charging stations.
Versatility and Compatibility
The 600A CCS2 plug compatible with all CCS2 EV models on the market today.whether you own a compact electric car, a powerful electric SUV a heavy truck, a bus or a commercial electric vehicle, our 600A CCS2 plug is designed to meet your DC fast charging needs
Enhanced Safety Features
The liquid cooling design of the 600A CCS2 connector is particularly beneficial in environments where rapid and continuous charging is required, as it helps to regulate temperatures and maintain stable charging conditions. This feature is essential for ensuring the safety of the charging process and protecting both the connector and the electric vehicle from potential risks associated with overheating.